Date: 20th October 2016
Fabricated T Strainer
T StrainerThe T Strainer is shaped like the letter "T" type, so we're called the T Strainer. T Strainer is to remove a small amount of solid particles in liquids of small equipment, the normal work of the protection equipment, when the fluid into the home of a certain size filter cartridge, the impurities are blocked, and clean filtrate from the filter outlet discharge, when cleaning, as long as can be disassembly of the filter cylinder is removed, you can reload after treatment. Therefore, the use of the maintenance is very convenient.- DN200 to DN350 "UNC-2B tapping.Optional strainer screens - Available on request for all sizes:- Stainless steel strainer screen having 0.8 mm perforations.- Stainless steel strainer screen having 1.6 mm perforations.- Stainless steel strainer screen having Mesh 40.- Stainless steel strainer screen having Mesh 100.StandardsThis product fully complies with the requirements of the European Pressure Equipment Directive 97 / 23 / EC and carries the mark when so required.Certification:This product is available with certification to EN 10204 3.1 and NACE approval.?Note: All certification / inspection requirements must be stated at the time of order placement.Hot tags: T Strainer, China manufacturer, factory, mill, supplier, cheapFabricated T StrainerTypical ServiceISO 9001-2008 quality managementStandard ASME "U" and "UM" Code Stamp"N" stamp availableBrazilian NR-13 availableEuropean standards - DIN/PED availableProperly sized components to meet any specified flow rate and retention requirementNSF approved coatingsUltra low discharge strainer technology that offers reduced purged volumesScreens? Standard material is 304SS.? Specify other alloy material as required.? Specify perforation and mesh size for proper particle retention.? Consider maximum allowable pressure drop when specifying.GeneralFabricated "T-Type" Strainers, can be used as an alternative to our standard cast range in order to comply with specific project specifications. They are also generally more cost effective and readily available for larger sizes i.e. above 12"(300mm)NB and higher pressure.